Adtech 1006 Activator

Adtech 1006

Adtech 1006 Activator

Adtech 1006 is a solvent-based activator formulated to improve the curing process of Adtech anaerobic adhesives.

Our expert says...

If you need to speed up the cure of any of the Adtech anaerobics, or if you are wanting to use an anaerobic on a plastic, use Adtech 1006 to improve the cure.

  • Accelerates anaerobic bonds.
Always consult MSDS before using Adtech 1006 for the first time. Spray or apply Adtech 1006 to one of the substrates to be bonded. Apply the adhesive to the other. For large areas, or where maximum cure speed is required apply Adtech 1006 to both of the substrates to be bonded. Adtech 1006 will not dry completely and remain active for up to 30 days. When adhesive is applied onto the activated substrate assembly should be completed within 10 seconds. The product should be allowed to develop full strength before subjecting to loads (typically 24 72 hours depending on bond gap and ambient conditions). The speed of cure with the activator will depend on the substrates being bonded and the adhesive grade. If used excessively, Adtech 1006 may cause discoloration. When stored in the original container at 21C, Adtech 1006 has a shelf life of 12 months from date of manufacture.

Get in touch now for pricing and application advice

  • Bonding solutions for every application
  • Helping you increase productivity safely
  • Expert on-hand support and advice

Whatever your challenge, whatever you need, call the experts

0117 971 1364

Case Studies & Advice