Aro-Bond 621 Spray NF Contact Adhesive
Our expert says...
- Fast drying
- Good heat resistance
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. SHAKE WELL BEFORE USE. Hold spray gun tip approx. 10 - 15cm from the surface to be covered and apply even coats to both surfaces. Do not allow it to concentrate or puddle in one area. Once adhesive has tacked off, generally within 1 - 3 minutes, contact bond can be made. To apply adequate pressure a pressure roller must be used. Disposal of canisters: please request disposal information.