Prefere 5750

Prefere 5750 Liquid Hardener

Prefere 4050 liquid resins mixed with hardener Prefere 5750, a resinous liquid containing filler, provide a range of phenol-resorcinol adhesives which are fully weatherproof and especially suited to the manufacture of large laminated timber structures. Prefere 4050 adhesives are also suitable for use in the production of heat resistant composite structures, eg fire-resisting doors. They are resistant to acids, weak alkalis, solvents and boiling water.

Our expert says...

Used with Prefere 4050 Resorcinol Phenol Resin.

Prefere 4050 resins with hardener Prefere 5750 meet the requirements of EN301-Type 1 and BS1203 (Type WBP). Prefere 4050 has been tested according to the German Standard DIN 68141 by the MPA, Otto-Graf-Institut in Germany and found to be suited for gluing load-bearing wooden structures for indoor and exterior use in accordance with DIN 1052.
  • Bonds wood, improved or densified woods, mineral fibre reinforced boards, brick, concrete and unglazed porcelain.
  • Bonds industrial and decorative laminated plastics (phenolic resin based or phenolic resin backed).
Prefere 4050 adhesives are simple to prepare. Both resin and hardener are liquids, and are mixed in a 1:1 ratio. It is essential that hardener Prefere 5750 is well stirred pouring from the container, as the filler can occasionally separate. Add the required amount of the hardener Prefere 5750 to the Prefere 4050 and mix thoroughly. The proportions may be measured by weight or volume.
Customers also bought


Get in touch now for pricing and application advice

  • Bonding solutions for every application
  • Helping you increase productivity safely
  • Expert on-hand support and advice

Whatever your challenge, whatever you need, call the experts

0117 971 1364

Case Studies & Advice