Products
0117 971 1364
0117 971 1364
0117 971 1364
Designed for You
Case studies, ideas & advice
Contact
Can't see what you want?
Call us:0117 971 1364
Can't see what you want?
Call us:0117 971 1364
Can't see what you want?
Call us:0117 971 1364

Adtech 6208
Adtech 6208 High Strength Nutlock
Adtech 6208 is designed for the sealing and locking of threaded fasteners. Adtech 6208 is a single component, medium strength thixotropic, acrylic based anaerobic nutlock. Adtech 6208 cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.
Our expert says...
A high strength threadlocker for heavy duty applications. Prevents leakage and loosening from vibration and shock. WRAS approved.
Adtech 6208 is particularly suitable for uses including heavy duty applications, such as nuts onto studs in pump housings and studs into motor housings. Used also on other fasteners where maximum strength is required.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. The rate of cure is dependent on the substrates being used, the gap fill required and the ambient temperature at the time of the cure. When the cure speed is unacceptably long, or larger gaps are present, using Adtech 1006 Activator will improve the cure speed. If the material is an inactive metal consider using activator. Shake the product thoroughly before use. Apply several drops to the bolt & nut. Assemble and tighten as required. Adtech 6208 should be stored in the original containers in a cool, dry place, at a temperature range of between 5C and 20C.